How To Update

SAMSUNG I7500 Firmware

To Be Able To Flash Samsung I7500 Phone you need I7500 Original Downloader and follow this steps:

1-      Run I7500 Download program.

2-      From Option section check: Reboot – Protect OPS.

3-      Now you have to select the software files you will flash the phone with.

4-      Click OPS button and specify "Orion.ops" file.

5-      Click BOOT button and specify file such as "i7500XXIXX_BOOT.tar" file.

6-      Click Phone button and specify file such as "i7500XXIXX_PHONE.tar" file.

7-      Click PDA button and specify file such as "i7500XXIXX_PDA.tar" file.

8-      Click CSC Button and specify file such as "i7500XXIXX_CSC.tar" file.

9-      Put the phone into firmware update mode (Press Volume down + OK+Power).

10-   Press Detect button and connect the phone to cable.

11-   After detecting the phone, "finished detecting COM ports" message is shown.

12-   Press START button to start flashing process.

13-   Do not touch or remove the phone during the process.

14-   When downloading is complete the phone will reboot by itself.

15-   Now disconnect the phone and do Full Reset, and you are done.

I7500 Flash Files