- Charge your Samsung SM-G531F Galaxy Grand Prime VE battery to more than 80%.
- Copy any stored data on your phone's internal memory, In case you want to keep them.
- It is recommended to do Factory Reset before installing the Rooted firmware.
- Install the Samsung USB Driver on your PC (If it is not already installed).
- Enable USB Debugging Mode in your phone settings.
- Odin3 Flasher.
- Samsung SM-G531F Galaxy Grand Prime VE Rooted Firmware.
Samsung SM-G531F Galaxy Grand Prime VE Rooting Steps:
- Extract the Samsung SM-G531F Rooted Firmware, You will get *.TAR.MD5 file.
- Run Odin3.exe flasher as administrator.
- Make sure that only Auto Reboot and F.Reset Time options are checked.
- Click on AP button and select the extracted *.tar.md5 file.
- Turn off your Galaxy Grand Prime VE, And remove battery for 10 seconds.
- Put the battery back and put the phone into Download Mode.
- Connect the phone to your PC using the USB cable.
- Wait until Odin3 detects the COM port number of your connected phone.
- Click on Start button to install the Rooted firmware into the Galaxy Grand Prime VE.
- Do nothing until Odin3 reboots your phone.
- Your phone will be rebooted automatically, So wait for it.
- When you see PASS! Word in green at Odin3 flasher, You can disconnect the phone.
- Congratulations, You have rooted your Samsung SM-G531F Galaxy Grand Prime VE.
- Done, Now you have SuperSU app installed on your phone.
- Keep in mind that you are going to use this ROM on your own Responsibility.
- Make sure to download the suitable firmware version for your phone.
- In case your phone stuck at Bootloop, Then you can reflash it with any Stock Firmware to fix it.