How To Update Samsung E1070 / E1070i Guru Firmware By NSpro Box

This Tutorial can be used to flash and update Samsung E1070 / E1070i / E1070c / E1070M / E1070T as the only thing you should change is the Firmware files when the same steps can be used.

Cable to Use: NSpro C450 cable.

Battery: Must be into the phone,and the phone OFF.

Firmware Update Steps:

1. Run NSpro Software and select E1070 model then click Next
2. Click Flash.
3. Set Baudrate: 921600
4. Set Mode: Bin & TFS
5. For BIN File select: E1070xxxxx.cla
6. For TFS File select: E1070xxxxx.tfs
7. Click Write and connect C450 cable to Off phone with battery inside to start the process.
8. Wait till all is done then disconnect cable.
9. Turn on the phone and do full reset: *2767*3855#

Samsung E1070 Original Firmwares.

NSpro Box Software Downloads