How To Update Samsung E1080 / E1080T Guru Firmware By NSpro Box

Cable to Use: NSpro C450 cable.

Battery: Must be into the phone,and the phone OFF.

Firmware Update Steps:

1. Run NSpro Software and select E1080 ( E1080T ) model then click Next
2. Click Flash.
3. Set Baudrate: 921600
4. Set Mode: Bin & TFS
5. For BIN File select: E1080xxxxx.cla ( E1080Txxxxx.cla )
6. For TFS File select: E1080xxxxx.tfs ( E1080Txxxxx.tfs )
7. Click Write and connect C450 cable to Off phone with battery inside to start the process.
8. Wait till all is done then disconnect cable.
9. Turn on the phone and do full reset: *2767*3855#

Samsung E1080 / E1080T Original Firmwares.

NSpro Box Software Downloads