How To Flash Samsung E1282T Duos Using USB Cable and Original Downloader
You can flash your Samsung E1282T Duos model by applying the below steps, Even this model is too simple for using, But you must have some tools and files to be able to flash it.
Tools And Files you have to get:
- SPD Drivers: Download it and install them on your PC, Then restart PC.
- Download Original Flash Files for Samsung E1282T, Then extract them too.
- Download Samsung E1282T Flasher, And extract it too.
- USB Cable to connect the phone to PC.
Samsung E1282T Flashing Steps:
- Turn off your Samsung E1282T mobile phone and take its battery out.
- From Flasher folder run ResearchDownload.exe program.
- Click on Settings button.
- At the opened window Select SC6530_SAMSUNG from Select Product drop down menu.
- Select 921600 for Bautrate.
- Select the following firmware files from the downloaded flash package:
- For NOR_FDL: nor_fdl.bin
- For NV: nvitem.bin
- For PS: SC6530_sc6530_samsung_EricPlus_stone.bin
- For MMICSC: mmi_res_128x160_csc.bin
- Go to Calibration tab and uncheck them all, Then click OK button.
- Click on Start Downloading button.
- Now put the battery back into your phone.
- Press and Hold OK key on your phone's keypad and connect USB cable to it.
- The program will start the flash process automatically.
- After the program finishes his job, Disconnect USB cable from phone.
- With your phone on enter this code *2767*3855#
- The above code will full reset your Samsung E1282T.
- Now you can use your mobile phone the way you like.