Banner

Samsung CSC Code Finder

Download It for FREE

How To Update Samsung S5310 Galaxy Pocket Neo Firmware - Manual Update Guide

Saturday, 20 July 2013 07:49 TSAR3000

This Guide will help you to: Use Odin flasher to update the firmware version of your Samsung Galaxy Pocket Neo GT-S5310, The update process will use a stock firmware package of Samsung S5310 to be installed into your device. You can update your device to any stock firmware version after reading this guide, All you have to do is reading, Understanding and applying the explained steps one by one.

Start the work by making a backup of any wanted data you have saved on your device memory, As we have nothing to do with its external memory card or SIM card, So read our online guide (Backup your Samsung Mobile Phone using Kies Software) to keep your important data safe.


Tips:
- Charge your phone's battery to be at least at 90% of charging level.
- Check your current firmware version of your device and write it down, It can help you when something goes wrong during the update.

Downloads:
- Official firmware package for Samsung S5310 Galaxy Pocket Neo.
- Odin Flasher.
- USB drivers for Samsung S5310 Galaxy pocket Neo.

After downloading the above files extract the zipped ones, Then install the USB drivers on your computer and restart it.

Tools:
- Suitable USB cable for Samsung S5310.
- A Computer with Windows OS installed.


Samsung S5310 Galaxy Pocket Neo Firmware Update Steps:

- Turn off your Samsung S5310 and take out its SIM and Memory cards.

- Run Odin.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: corsicass.pit

- Now you have to select the firmware files from the extracted firmware folder:

Click Bootloader button to select: BOOT_S5310xxxxxx_REV00.tar.md5
Click PDA button to select: CODE_S5310xxxxxx_..._REV00_user_low_ship.tar.md5
Click Phone button to select: MODEM_S5310xxxxxx_REV00.tar.md5
Click CSC button to select: CSC_Oxx_S5310Oxxxxxx_..._REV00_user_low_ship.tar.md5

- Put your Samsung S5310 Galaxy Pocket Neo into Download Mode:

Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Connect the phone to computer using the USB cable.

- Wait until Windows detects the device and install its drivers.

- If Odin detects the connected device correctly you will see its COM port number (0:[COMxx]).

- Click on Start button.

- Odin will start to update your phone using the selected firmware files one by one.

- The phone will be rebooted after completing the update.

- If the update was successful you will see PASS! Word at Odin's window.

- Disconnect the USB cable from phone.

- When the device is fully on you can check the new firmware version (*#1234#).

- Turn the device off again.

- Insert your SIM and Memory cards into the device.

- Turn the phone on.

- In case you make a backup of your phone's data then you can restore it again.

- Congratulations, You have updated your Samsung S5310 Galaxy pocket Neo to a new firmware version.


Notice:
- In case you have one big file inside the firmware package then no need to use any PIT file or to check Re-Partition option, And the one big file should be selected as PDA file.


Last Updated on Saturday, 20 July 2013 08:03



You are here:   MainHow To How To Update Samsung S5310 Galaxy Pocket Neo Firmware - Manual Update Guide
| + -
We have 694 guests online