Banner

Samsung CSC Code Finder

Download It for FREE

How To Flash Samsung S5270K Ch@t 527 And Update Its Firmware Version

Monday, 05 August 2013 09:41 TSAR3000

Tools and Files:

- Samsung S5270K Ch@t 527 Firmware Package.
- S5270K Ch@t 527 Flash Loader program.
- USB cable.
- A computer with Windows OS installed.

Download and collect the above tools and files first, Then extract any zipped one to save time during the update process, After that you can start applying the below steps one by one.

Samsung S5270K Ch@t 527 Firmware Update Steps:

- Make sure that the device battery is fully charged.

- Turn the phone off.

- Take out its SIM-card and memory card too.

- Inside the Flash Loader folder you will see: Sunstone_V5_00_0_1_WHQLed.zip extract it too, Then click on Setup.exe and install the USB drivers.

- Run bfloader.exe program.

- Click on SET Model button to select: S3770_Telesto_Setting_v00.mdl

- To select the Main flash file check the Main box, Then click on Browse button and select: S5270Kxxxxx.ptt

- Click on Main Partition Table button , Then click OK at the new Window.

- To select the CSC flash file check the CSC box, Then click on Browse button and select: S5270KOxxxxx.ptt

- Click on CSC Partition Table button button, Then click OK at the new Window.

- Select USB option at Communication Settings.

- Remove Battery from phone and insert it again.

- Click on START button.

- With battery inside the phone Press and Hold 2 + 3 Keys then plug the USB cable into it.

- Windows will detects the device and installs its needed drivers.

- When Flash Loader program detects your phone it will start to install the firmware files into your device.

- After Flash Loader finishes his job you will see "Slot freed for new download"

- Disconnect the USB cable from it.

- Turn on your Samsung S5270K.

- Do full reset using this code *2767*3855#

- After rebooting your phone will be ready to use.


Last Updated on Monday, 05 August 2013 09:52



You are here:   MainHow ToHow To Flash Samsung S5270K Ch@t 527 And Update Its Firmware Version
| + -
We have 341 guests online