Banner

Samsung CSC Code Finder

Download It for FREE

How To Update Samsung Galaxy Ace 3 LTE S7275R Firmware - Manual Update Guide

Saturday, 26 October 2013 09:29 TSAR3000

Needed Downloads For Updating Samsung Galaxy Ace 3 LTE S7275R Firmware:
- Samsung Galaxy Ace 3 LTE S7275R Stock Firmware Package.
- Odin Flasher.
- Samsung Galaxy Ace 3 LTE S7275R USB Drivers.

Needed Tools For Updating Samsung Galaxy Ace 3 LTE S7275R Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.

Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that your are doing this at your own RISK.

Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).


Samsung Galaxy Ace 3 LTE S7275R Firmware Update Steps:

- Turn off the device, And take out its battery, SIM and memory cards.

- Run Odin3.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: S7275R_signed_LOGAN_8G_OPEN_130809.pit

- Firmware files selection:

Click Bootloader button to select: BOOTLOADER_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
Click PDA button to select: CODE_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
Click Phone button to select: MODEM_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5
Click CSC button to select: CSC_Oxx_S7275Rxxxxxxx_..._REV01_user_low_ship.tar.md5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Turn off the device again, Reinsert the SIM and memory cards and turn it on.

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.


Notice: When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.


Last Updated on Saturday, 26 October 2013 09:37



You are here:   MainHow ToHow To Update Samsung Galaxy Ace 3 LTE S7275R Firmware - Manual Update Guide
| + -
We have 204 guests online