Banner

Samsung CSC Code Finder

Download It for FREE

How To Update Samsung Galaxy Fame Lite GT-S6790 Software Using Odin3 Program

Thursday, 10 April 2014 15:27 TSAR3000

We can use this Guide to update all variants of the Samsung Galaxy Fame Lite model, As you may know there are Samsung GT-S6790, GT-S6790E, GT-S6790L, And GT-S6790N, The steps we explained in this guide can by applied for updating the firmware version of any one of the mentioned models, But be careful and use only the suitable firmware files for each one, Also be sure to use the right PIT file in case you have to.


Preparation Steps:

1- Check the current firmware of your mobile, You can check it from Setting > About Phone, Or you can use this easy code *#1234#

2- It is a good idea to write down your device current firmware version, It will be useful later, In case something goes wrong.

3- Charge your mobile's battery to be at least at 90% of charging level.

4- Updating your mobile's firmware will delete everything from your device internal memory, So read this Guide to learn how you can make a backup of your important data (SMS, Contacts, Notes...etc).

5- In case you have an external memory card inserted into your mobile, Then remove it.

6- Download the Samsung USB Driver, And install it, Then restart your computer.

7- Download Odin3 program (Original Android Flasher), Extract to your computer's desktop.

8- Download The Firmware package (S6790), Select the version you want to install it into your mobile.

9- Extract the firmware package to a known location on your computer.


Odin3 Settings:

1- Double click on Odin3.exe to run it.

2- These settings must be checked: Auto Reboot, F.Reset Time.

3- If you have the PIT file of your Samsung model, Then check: Re-Partition


Samsung GT-S6790 Firmware Files Selection:

- Click on PIT button and select: nevisvess.pit
- Click on Bootloader button and select: BOOT_S6790xxxxxx_REV00.tar.md5
- Click on PDA button and select: CODE_S6790xxxxxx_1507027_REV00_user_low_ship.tar.md5
- Click on PHONE button and select: MODEM_S6790xxxxxx_REV00.tar.md5
- Click on CSC button and select: CSC_Oxx_S6790Oxxxxxx_1506133_REV00_..low_ship.tar.md5


Putting your Samsung GT-S6790 into Download Mode:

At this step you have to turn off your Samsung cell phone, Take out its battery and SIM card, Then read this Guide to put it into Download Mode, To be able to install the new firmware into you device you should put it into this mode.


Installing the new Firmware into your Samsung GT-S6790:

1- After you put your mobile into Download Mode, Use the USB cable to connect it to your computer.

2- You have to wait until Windows detects the device and installs any needed drivers.

3- Look at Odin3 program's window, If the program detects your connected device correctly, You should see its COM Port number (0:[COMxx]).

4- You are ready to install the new firmware files into your Samsung mobile, Click Start button to begin.

5- After you click the Start button, Odin3 program will start to install the selected firmware files into the connected device.

6- Odin3 program will restart your Samsung mobile automatically after installing the firmware.

7- Wait until your mobile is restarted.

8- Look again at Odin3 program's window, If your see PASS! word in green, Then the update was done successfully.

9- Disconnect your mobile.

10- When the mobile is fully on, Check the new installed firmware version.

11- Now you are ready to use the device, So reinsert the SIM can Memory cards, Restore your backup, And customize it.


Notices:

- You can update your device firmware version without using any PIT file, So use the PIT file only if you need to fix your device partitions.

- When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.

- In new Android Versions like Android 4.3 Jelly Bean you will get new firmware files names, You will get CP, AP, And BL, And you have to use Odin3 v3.9 instead of v3.7, So CP = Modem, AP = Platform or CODE, BL = BOOTLOADER, And CSC = CSC


Last Updated on Thursday, 10 April 2014 17:56



You are here:   MainHow ToHow To Update Samsung Galaxy Fame Lite GT-S6790 Software Using Odin3 Program
| + -
We have 203 guests online