Samsung CSC Code Finder

Download It for FREE

How To Install VPUCNE2 Android 4.4.2 KitKat Firmware on Galaxy Note 2 SPH-L900 For Sprint

Thursday, 19 June 2014 08:03 Tsaro

After a long waiting for the Android 4.4.2 KitKat update for Galaxy Note 2 SPH-L900, It is out now, This is the first KitKat update for this model, Now you can update your Sprint Galaxy Note 2 to L900VPUCNE2 software version, And enjoy all the KitKat OS features.

We will explain in this Guide the manual method of installing the L900VPUCNE2 firmware into your Sprint Galaxy Note 2 SPH-L900, This is very useful when you can not update your Note 2 to the KitKat version via OTA or Samsung Kies, Here you will learn how to use Odin flasher to install the L900VPUCNE2 firmware package on your Galaxy Note 2, We provided all the needed files, So no need to search for them.

The New L900VPUCNE2 Android 4.4.2 KitKat Firmware Details:

  • Model Code: SPH-L900
  • Model Name: GALAXY Note II
  • Country: Sprint (cdma)
  • Android Version: Android 4.4.2
  • Changelist: 1561791
  • Build Date: Wed, 07 May 2014 15:01:36 +0000
  • Product Code: SPR
  • PDA Version: L900VPUCNE2
  • CSC Version: L900SPTCNE2
  • MODEM Version: L900VPUCNE2


- Odin3 Flasher.
- Samsung Galaxy Note 2 SPH-L900 USB Driver.
- L900VPUCNE2 Firmware Update Package.

Preparation Steps:

1- Download Odin3 flasher and extract it.

2- Extract the L900VPUCNE2 Firmware Update Package.

3- Download and install the Samsung USB driver.

4- Restart your Computer.

5- Backup any wanted data on your device.

6- Charge your device battery to be at 80% minimum.

7- It is better to make Factory Data Reset, That can keep you away from some errors later.

8- Enable USB debugging option.

Installing VPUCNE2 Android 4.4.2 KitKat Update on your Samsung Galaxy Note 2 SPH-L900 For Sprint:

1- Turn off your Galaxy Note 2 SPH-L900, And take out its SIM and Memory card.

2- Put your Galaxy Note 2 into Download Mode.

3- Connect it to your Computer using the USB cable.

4- Wait for a couple of seconds to let your PC recognize the device.

5- Run Odin3.exe as Administrator.

6- Make sure that Re-Partition option is not checked.

7- If Odin3 flasher detects your Galaxy Note 2 correctly, You will see its COM port number 0:[COMxx]

8- Click on AP button and select: ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship.tar.md5

9- Click on Start button, Odin3 will begin to install the new firmware on your device.

10- After the installing is done, Your Galaxy Note 2 will be rebooted automatically.

11- When your device is on again, Disconnect it from your PC.

12- When it is completely on, Check the new installed firmware.

13- Done, And now you have the new VPUCNE2 KitKat firmware installed on your Galaxy Note 2 SPH-L900.

Last Updated on Thursday, 19 June 2014 08:17

You are here:   MainHow ToHow To Install VPUCNE2 Android 4.4.2 KitKat Firmware on Galaxy Note 2 SPH-L900 For Sprint
| + -
We have 122 guests online