Samsung CSC Code Finder

Download It for FREE

How To Install UVUDNF1 Android 4.4.2 KitKat Update on Galaxy Note 3 T-Mobile SM-N900T

Monday, 23 June 2014 07:58 Tsaro

The new UVUDNF1 Android 4.4.2 KitKat official update is out for the Galaxy Note 3 SM-N900T T-mobile model, It it better to update your Galaxy Note 3 to this new update, You can update your Note 3 to this version via OTA, Or by using Samsung Kies, But in case you could not update it with any of those methods, Then you can update it manually.

This Tutorial will show you the manual method that you can use to update your Galaxy Note 3 to UVUDNF1 version, You will use Odin3 flasher to install this official firmware update package on your SM-N900T, In addition to the Odin3 flasher you will use the original USB cable of your Note 3, And any Windows PC, It is a very easy method for updating Samsung Android mobiles, Just read the complete guide first, Then start to apply it to your Note 3 device.

The New UVUDNF1 Software Update Details:

  • Model Code: SM-N900T
  • Model Name: GALAXY Note 3
  • Country: USA
  • Carrier: T-Mobile
  • Android OS Version: Android 4.4.2
  • Changelist: 1966668
  • Build Date: Tue, 17 Jun 2014 10:18:03 +0000
  • Product Code: TMB
  • PDA Version: N900TUVUDNF1
  • CSC Version: N900TTMBDNF1
  • MODEM Version: N900TUVUDNF1

Files and Programs to Download:

- Odin3 Flasher.
- Samsung Galaxy Note 3 SM-N900T USB Driver.
- N900TUVUDNF1 Firmware Update Package.

Preparation Steps:

1- Download Odin3 flasher and extract it.

2- Extract the N900TUVUDNF1 Firmware Update Package.

3- Download and install the Samsung USB driver.

4- Restart your Computer.

5- Backup any wanted data on your device.

6- Charge your device battery to be at 80% minimum.

7- It is better to make Factory Data Reset, That can keep you away from some errors later.

8- Enable USB debugging option.

Installing UVUDNF1 Android 4.4.2 KitKat Update on your Galaxy Note 3 SM-N900T:

1- Turn off your device, And take out its SIM and Memory card.

2- Put your Galaxy Note 3 into Download Mode.

3- Connect it to your Computer using the USB cable.

4- Wait for a couple of seconds to let your PC recognize the connected device.

5- Run Odin3.exe flasher as Administrator.

6- Make sure that Re-Partition option is not checked.

7- If Odin3 flasher detects your Galaxy Note 3 correctly, You will see its COM port number 0:[COMxx]

8- Click on AP button and select: N900TUVUDNF1_N900TTMBDNF1_N900TUVUDNF1_HOME.tar.md5

9- Click on Start button, Odin3 will begin to install the new firmware on your Note 3.

10- After the installing is done, Your Galaxy Note 3 SM-N900T will be rebooted automatically.

11- When your device is on again, Disconnect it from your PC.

12- Wait until it is completely on, Then check the new installed firmware.

13- Done, Congratulations, You have installed the new UVUDNF1 firmware version on your Galaxy Note 3 SM-N900T.

Last Updated on Monday, 23 June 2014 08:06

You are here:   MainHow ToHow To Install UVUDNF1 Android 4.4.2 KitKat Update on Galaxy Note 3 T-Mobile SM-N900T
| + -
We have 152 guests online