Banner

Samsung CSC Code Finder

Download It for FREE

How To Update Galaxy S4 Active To Android 4.4.2 KitKat Firmware Using Odin Update Package

Monday, 23 June 2014 08:25 Tsaro

As the Samsung Galaxy S4 Active I9295 model has started to get Android 4.4.2 KitKat official update, It is very important to learn how to install these new KitKat updates on your GS4 Active, Here we will talk about the manual update method, You will see how you can use Odin firmware update package to update the software version of GS4 Active I9295 to Android 4.4.2 KitKat version.

We upload many Android 4.4.2 KitKat firmware update packages to our Free Samsung Support section, like I9295XXUCNE4, I9295XXUCNE5, And in this tutorial we will use I9295XXUCNF1 package, You can read more details about it below.

The New XXUCNF1 Firmware Update Details:

  • Model Code: GT-I9295
  • Model Name: GALAXY S4 Active
  • Android Os Version: Android 4.4.2 KitKat
  • Changelist: 1429916
  • Build Date: Fri, 06 Jun 2014 04:47:51 +0000
  • PDA Version: I9295XXUCNF1
  • CSC Version: I9295OLBCNF1
  • MODEM Version: I9295XXUCNF1


Files and Programs to Download:

- Odin3 Flasher.
- Samsung Galaxy S4 Active I9295 USB Driver.
- I9295XXUCNF1 Firmware Update Package, Or you can select any wanted firmware update package.

Preparation Steps:

1- Download Odin3 flasher and extract it.

2- Extract the I9295XXUCNF1 Firmware Update Package.

3- Download and install the Samsung USB driver.

4- Restart your Computer.

5- Backup any wanted data on your device.

6- Charge your device battery to be at 80% minimum.

7- It is better to make Factory Data Reset, That can keep you away from some errors later.

8- Enable USB debugging option.


Installing XXUCNF1 Android 4.4.2 KitKat Update on your Galaxy S4 Active I9295:

1- Turn off your device, And take out its SIM and Memory card.

2- Put your Galaxy S4 Active into Download Mode.

3- Connect it to your Computer using the USB cable.

4- Wait for a couple of seconds to let your PC recognize the connected device.

5- Run Odin3.exe flasher as Administrator.

6- Make sure that Re-Partition option is not checked.

7- If Odin3 flasher detects your Galaxy S4 Active correctly, You will see its COM port number 0:[COMxx]

8- Click on AP button and select: I9295XXUCNF1_I9295OLBCNF1_I9295XXUCNF1_HOME.tar.md5

9- Click on Start button, Odin3 will begin to install the new firmware on your GS4 Active.

10- After the installing is done, Your Galaxy S4 Active I9295 will be rebooted automatically.

11- When your device is on again, Disconnect it from your PC.

12- Wait until it is completely on, Then check the new installed firmware.

13- Done, Congratulations, You have installed the new XXUCNF1 firmware version on your Galaxy S4 Active I9295.


Last Updated on Monday, 23 June 2014 08:34



You are here:   MainHow ToHow To Update Galaxy S4 Active To Android 4.4.2 KitKat Firmware Using Odin Update Package
| + -
We have 193 guests online