Banner

Samsung CSC Code Finder

Download It for FREE

How To Install The New XXANR6 Firmware Update on Galaxy S3 Mini I8190N

Tuesday, 24 June 2014 15:02 Tsaro

The Samsung Galaxy S3 Mini GT-I8190N model got a new firmware update, The new update is XXANR6 Android 4.1.2 Jelly Bean, Samsung keeps updating this model until now, the first country that had this XXANR6 firmware update was Germany, And it came to T-Mobile Germany GS3 Mini devices.

When a new firmware update is out, Every user can update his device via OTA or Samsung KIES, But in some cases that does not work, And sometimes the update via the both mentioned methods could be corrupted, And at that point you have to install the update manually, To install any firmware update manually, You should use Odin3 flasher, And in this Tutorial we will help you to learn how to update your Galaxy S3 Mini I8190N using Odin3 flasher, And a Stock firmware update package.

The New XXANR6 Firmware Update Details:

  • Model Code: GT-I8190N
  • Model Name: GALAXY S III mini
  • Country: Germany
  • Carrier: T-Mobile
  • Android OS Version: Android 4.1.2 Jelly Bean
  • Changelist: 1546175
  • Build Date: Fri, 23 May 2014 10:09:55 +0000
  • Product Code: DTM
  • PDA Version: I8190NXXANR6
  • CSC Version: I8190NDTMANE2
  • MODEM Version: I8190NXXANR6


Files and Programs to Download:

- Odin3 Flasher.
- Samsung Galaxy S3 Mini GT-I8190N USB Driver.
- I8190NXXANR6 Firmware Update Package, Select the suitable package for your carrier.

Preparation Steps:

1- Download Odin3 flasher and extract it.

2- Extract the I8190NXXANR6 Firmware Update Package.

3- Download and install the Samsung USB driver.

4- Restart your Computer.

5- Backup any wanted data on your device.

6- Charge your device battery to be at 80% minimum.

7- It is better to make Factory Data Reset, That can keep you away from some errors later.

8- Enable USB debugging option.


Installing XXANR6 Android 4.1.2 Jelly Bean Update on your Galaxy S3 Mini GT-I8190N:

1- Turn off your device, And take out its SIM and Memory card.

2- Put your Galaxy S3 Mini into Download Mode.

3- Connect it to your Computer using the USB cable.

4- Wait for a couple of seconds to let your PC recognize the connected device.

5- Run Odin3.exe flasher as Administrator.

6- Make sure that Re-Partition option is not checked.

7- If Odin3 flasher detects your Galaxy S3 Mini correctly, You will see its COM port number 0:[COMxx]

8- Click on AP button and select: I8190NXXANR6_I8190NDTMANE2_HOME.tar.md5

9- Click on Start button, Odin3 will begin to install the new firmware on your GS3 Mini I8190N.

10- After the installing is done, Your Galaxy S III Mini will be rebooted automatically.

11- When your device is on again, Disconnect it from your PC.

12- Wait until it is completely on, Then check the new installed firmware.

13- Done, Congratulations, You have installed the new XXANR6 firmware version on your Galaxy S3 Mini GT-I8190N.


Last Updated on Tuesday, 24 June 2014 15:10



You are here:   MainHow ToHow To Install The New XXANR6 Firmware Update on Galaxy S3 Mini I8190N
| + -
We have 364 guests online