Samsung CSC Code Finder

Download It for FREE

How To Install XXUENF3 Android 4.4.2 KitKat Software on SM-N900 Galaxy Note 3

Tuesday, 01 July 2014 13:45 Tsaro

The Samsung Galaxy Note 3 SM-N900 got a new firmware update, The new update is XXUENF3, It is Android 4.4.2 KitKat version, The previous update was XXUDND1, So in this Tutorial you will learn how you can use Odin3 flasher, and a stock firmware update package to update the software version of your Galaxy Note 3 SM-N900, It is not necessary to have the XXUDND1 installed on your Note 3 device, Even if your Note 3 has an older version XXDNB2 for example, You can install the new XXUENF3 firmware update safely, All you have to do is to read the tutorial steps carefully, Then apply them one by one, In this tutorial we used N900XXUENF3_SERENF2 Russia firmware package as an example, But you can select and use the suitable package for your Country and Carrier.

The New XXUENF3 Firmware Update Details:

  • Model Code: SM-N900
  • Model Name: GALAXY Note 3
  • Country: Russia
  • Android OS Version: Android 4.4.2 KitKat
  • Changelist: 1955999
  • Build date: Mon, 23 Jun 2014 12:07:20 +0000
  • Product Code: SER
  • PDA: N900XXUENF3
  • CSC: N900SERENF2

Download The Following Files and Programs:

- Odin3 Flasher.
- Samsung Galaxy Note 3 SM-N900 USB Driver.
- N900XXUENF3 Firmware Update Package.

Preparation Steps:

1- Download Odin3 flasher and extract it.

2- Extract the N900XXUENF3 Firmware Update Package.

3- Download and install the Samsung Galaxy Note 3 USB driver.

4- Restart your Computer.

5- Backup any wanted data on your device.

6- Charge your Note 3 battery to be at 80% minimum.

7- It is better to make Factory Data Reset, That can keep you away from some errors later.

8- Enable USB debugging option.

Installing XXUENF3 Android 4.4.2 KitKat Update on your Galaxy Note 3 SM-N900:

1- Turn off your device, And take out its SIM and Memory card.

2- Put your Galaxy Note 3 into Download Mode.

3- Connect it to your Computer using the USB cable.

4- Wait for a couple of seconds to let your PC recognize the connected device.

5- Run Odin3.exe flasher as Administrator.

6- Make sure that Re-Partition option is not checked.

7- If Odin3 flasher detects your Galaxy Note 3 correctly, You will see its COM port number 0:[COMxx]

8- Click on AP button and select: N900XXUENF3_N900SERENF2_N900XXUENF2_HOME.tar.md5

9- Click on Start button, Odin3 will begin to install the new firmware on your Galaxy Note 3.

10- After the installing is done, Your Galaxy Note 3 will be rebooted automatically.

11- When your device is on again, Disconnect it from your PC.

12- Wait until it is completely on, Then check the new installed firmware.

13- Done, Congratulations, You have installed the new XXUENF3 firmware version on your Galaxy Note 3 SM-N900.

Last Updated on Tuesday, 01 July 2014 13:54

You are here:   MainHow ToHow To Install XXUENF3 Android 4.4.2 KitKat Software on SM-N900 Galaxy Note 3
| + -
We have 218 guests online