Samsung CSC Code Finder

Download It for FREE

How To Install Arabic Android 4.4.2 KitKat Firmware on Galaxy S3 Neo+ GT-I9301i

Thursday, 03 July 2014 06:51 Tsaro

The Samsung Galaxy S3 Neo+ GT-I9301i is available in many countries, You may get a device from a European country, Or from another area, So you may find that it does not support Arabic language, And that is not a good news for you.

This Tutorial will help you to install Arabic language on your Galaxy S3 Neo+ GT-I9301i, The Arabic firmware package that we are going to install is an Official Samsung firmware package, In this guide we will use I9301IXXUANF5_OJVUANF1 KSA Saudi Arabia Android 4.4.2 KitKat firmware package, You can use any other Arabic firmware package you want to install on your device, All you have to do is to follow the same steps we explained here.

Download The Following Files and Programs:

- Odin3 Flasher.
- Samsung Galaxy S3 Neo+ GT-I9301i USB Driver.
- I9301IXXUANF5_OJVUANF1 KSA Saudi Arabia Firmware Update Package, You can Download any other Arabic Firmware too.

Preparation Steps:

1- Download Odin3 flasher and extract it.

2- Extract the I9301IXXUANF5 Firmware Update Package.

3- Download and install the Samsung Galaxy S3 Neo+ GT-I9301i USB driver.

4- Restart your Computer.

5- Backup any wanted data on your device.

6- Charge your Galaxy S3 Neo+ battery to be at 80% minimum.

7- It is better to make Factory Data Reset, That can keep you away from some errors later.

8- Enable USB debugging option.

Installing I9301IXXUANF5 Arabic Android 4.4.2 KitKat Firmware on your Galaxy S3 Neo+ GT-I9301i:

1- Turn off your device, And take out its SIM and Memory card.

2- Put your Galaxy S3 Neo+ into Download Mode.

3- Connect it to your Computer using the USB cable.

4- Wait for a couple of seconds to let your PC recognize the connected device.

5- Run Odin3.exe flasher as Administrator.

6- Make sure that Re-Partition option is not checked.

7- If Odin3 flasher detects your Galaxy S3 Neo+ correctly, You will see its COM port number 0:[COMxx]

8- Click on AP button and select: I9301IXXUANF5_I9301IOJVUANF1_I9301IXXUANF2_HOME.tar.md5

9- Click on Start button, Odin3 will begin to install the Arabic firmware on your Galaxy S3 Neo+.

10- After the installing is done, Your GT-I9301i will be rebooted automatically.

11- When your device is on again, Disconnect it from your PC.

12- Wait until it is completely on, Then check the new installed firmware.

13- Done, Congratulations, You have installed the I9301IXXUANF5 Arabic firmware version on your Galaxy S3 Neo+ GT-I9301i.

Last Updated on Thursday, 03 July 2014 06:59

You are here:   MainHow ToHow To Install Arabic Android 4.4.2 KitKat Firmware on Galaxy S3 Neo+ GT-I9301i
| + -
We have 174 guests online