Banner

Samsung CSC Code Finder

Download It for FREE

How To Update The Samsung Galaxy Pocket 2 Duos Firmware Version - Odin3 Update Package

Tuesday, 16 December 2014 10:26 TSAR3000

This Software update Guide can be used to update the firmware version of all Samsung Galaxy Pocket 2 Duos Models, SM-G110B, SM-G110H, And SM-G110M.

The only thing that you should take care of is using the suitable firmware package for each model, That means do not use Samsung SM-G110M firmware files to update or flash the Samsung SM-G110H or SM-G110B models, And vice versa.


How To Prepare The Samsung Galaxy Pocket 2 Duos for The Update:

- Make sure that the device battery has at least 90% of charging level.

- Backup any wanted data you have saved on your Samsung mobile.

- Check the installed firmware version on your mobile, And write it down.

- Remove any existed SIM or Memory cards from your device.

- It is better to Factory Reset your mobile before the update.



How To Prepare the needed Tools and Files:

- Use stable computer to perform the update process.

- Use a high quality USB cable to connect your mobile to computer.

- Download Samsung Galaxy Pocket 2 Duos USB Driver, And install it on your computer.

- Restart your computer after installing the USB Driver.

- Download Odin3 flasher, And extract it on your computer desktop.

- Download The wanted Firmware Package ( G110B | G110H | G110M ) which you want to install on your Samsung Smartphone.

- Extract the downloaded firmware package.



How To Run Odin3 Flasher and Select the Firmware Files and Settings:

- Select Odin3.exe program, And run it as Administrator.

- These settings must be checked: Auto Reboot, F. Reset Time

- If you want to flash PIT file, Then check Re-Partition, Otherwise leave it unchecked.

- In case you have one file firmware package, Then Click on AP button and select the file.

- In case you have full firmware package ( Bootloader + AP + CP + CSC files):

- Click on PIT button and select: POCKET23G_EUR_OPEN.pit
- Click on BL button and select: BL_G110Bxxxxxxxx_..._user_low_ship.tar
- Click on AP button and select: AP_G110Bxxxxxxxx_..._REV04_user_low_ship.tar
- Click on CP button and select: CP_G110Bxxxxxxxx_..._REV04_user_low_ship.tar
- Click on CSC button and select: CSC_xxx_G110Bxxxxxxxx_...REV04_user_low_ship.tar


How To Update The Samsung Galaxy Pocket 2 Duos :

- Turn off your Galaxy Pocket 2 Duos.

- Put the Smartphone into Download Mode.

- Connect it to your computer using the USB cable.

- Wait until Windows detects the device and install the needed USB Driver.

- When Odin3 program detects the COM port number of the connected device, Then it is Ready.

- Click on Start button.

- Odin3 program will start installing the new firmware on your Galaxy Pocket 2 Duos.

- Do not ever try to disconnect the USB cable from the device or computer during the update.

- Odin3 program will install the new firmware on your Smartphone, And then reboot it automatically.

- Wait until you see PASS! Word on Odin3 program.

- Disconnect your device.

- Apply the wanted settings.

- Check the new installed firmware.

- Done.


Last Updated on Tuesday, 16 December 2014 10:40



You are here:   MainHow ToHow To Update The Samsung Galaxy Pocket 2 Duos Firmware Version - Odin3 Update Package
| + -
We have 289 guests online