Banner

Samsung CSC Code Finder

Download It for FREE

How To Update Samsung SM-G925F Galaxy S6 Edge LTE-A Firmware - Odin3 Guide

Thursday, 23 July 2015 09:43 TSAR3000

What is this Guide for:

This guide will show you the right and safe steps which you should follow to update and install a new official firmware version on the Samsung Galaxy S6 Edge SM-G925F, The update process will be done manually using Odin3 flasher, And we will use 4Files firmware package as an example, But you can use the same steps to install a new one file update package.


Guide Sections:

- Collecting the needed files, Programs, And tools.

- Important steps before starting the update process.

- Odin3 settings.

- Selecting the firmware files.

- Installing the new firmware on the Samsung Galaxy S6 Edge SM-G925F.

- Notices.


Collecting the needed files, Programs, And tools:

- Download and install Samsung Galaxy S6 Edge SM-G925F USB Driver on your PC.

- Download Odin3 flasher, And extract the zip file.

- Download and extract the wanted Official Firmware package for Galaxy S6 Edge SM-G925F.


Important steps before starting the update process:

- Charge the phone's battery to be at least at 90%.

- Type *#1234# Using the phone's Keypad, And write down the installed firmware version.

- Backup any wanted data before updating the device firmware, Read this Backup Guide.

- Connect the phone to PC via the USB cable to install the needed USB driver.

- Restart your PC after installing the USB driver.


Odin3 settings:

- Run Odin3.exe program as Administrator.

- Auto Reboot, F.Reset Time options must be checked.

- Do not check Re-Partition option, Unless you have the PIT file.


Selecting the firmware files:

- Click on PIT button and select: ZEROLTE_EUR_OPEN.pit

- Click on BL button and select: BL_G925Fxxxxxxxx_CL4497415_...REV02_user_low_ship.tar.md5

- Click on AP button and select: AP_G925Fxxxxxxxx_CL4497415_...REV02_user_low_ship.tar.md5

- Click on CP button and select: CP_G925Fxxxxxxxx_CL4497415_...REV02_user_low_ship.tar.md5

- Click on CSC button and select: CSC_Oxx_G925FOxxxxxxxx_...REV02_user_low_ship.tar.md5


Installing the new firmware on the Samsung Galaxy S6 Edge SM-G925F:

- Turn Off the Galaxy S6 Edge Smartphone, And wait for 10 seconds.

- Put the phone into Download Mode.

- Use the USB cable to connect the phone to the PC.

- Wait until Windows detects the new connected device completely.

- You should see the COM port number of the phone at Odin3 window (0:[COMxx]).

- Click Start button.

- Odin3 flasher will start installing the new firmware files into the Galaxy S6 Edge.

- Wait until Odin3 flasher reboots the phone.

- If you see PASS! Word at Odin3 program's window, That means the update was done successfully.

- Disconnect the phone.

- After the device is completely on, Type *#1234# Using the phone's Keypad.

- You should see the details of the new installed firmware on screen.

- Now the Samsung Galaxy S6 Edge SM-G925F has a new firmware version.


Notices:

- In this Guide we used a full firmware package, In case you download one file firmware package, Then you have to select the one file as AP file only, And complete the other steps as explained.

- You can update your device software version without using any PIT file, So use the PIT file only if you need to fix your device partitions.

- If your Samsung Galaxy S6 Edge SM-G925F is locked to any network worldwide, You can Unlock it so easy, Cheap Samsung Unlock Code is available.


Last Updated on Thursday, 23 July 2015 09:57



You are here:   MainHow ToHow To Update Samsung SM-G925F Galaxy S6 Edge LTE-A Firmware - Odin3 Guide
| + -
We have 311 guests online