Samsung CSC Code Finder

Download It for FREE

How To Root Samsung SM-G388F Galaxy Xcover 3 - v4.4.4 KitKat

Saturday, 12 March 2016 10:26 TSAR3000


- Charge your Samsung SM-G388F Galaxy Xcover 3 battery to more than 80%.

- Copy any stored data on your phone's internal memory, In case you want to keep them.

- It is recommended to do Factory Reset before installing the Rooted firmware.

- Install the Samsung USB Driver on your PC (If it is not already installed).

- Enable USB Debugging Mode in your phone settings.


- Odin3 Flasher.
- Samsung SM-G388F Galaxy Xcover 3 Rooted Firmware.

Samsung SM-G388F Galaxy Xcover 3 Rooting Steps:

- Extract the Samsung SM-G388F Rooted Firmware, You will get *.TAR.MD5 file.

- Run Odin3.exe flasher as administrator.

- Make sure that only Auto Reboot and F.Reset Time options are checked.

- Click on AP button and select the extracted *.tar.md5 file.

- Turn off your Galaxy Xcover 3, And remove battery for 10 seconds.

- Put the battery back and put the phone into Download Mode.

- Connect the phone to your PC using the USB cable.

- Wait until Odin3 detects the COM port number of your connected phone.

- Click on Start button to install the Rooted firmware into the Galaxy Xcover 3.

- Do nothing until Odin3 reboots your phone.

- Your phone will be rebooted automatically, So wait for it.

- When you see PASS! Word in green at Odin3 flasher, You can disconnect the phone.

- Congratulations, You have rooted your Samsung SM-G388F Galaxy Xcover 3.

- Done, Now you have SuperSU app installed on your phone.

- Keep in mind that you are going to use this ROM on your own Responsibility.

- Make sure to download the suitable firmware version for your phone.

- In case your phone stuck at Bootloop, Then you can reflash it with any Stock Firmware to fix it.

Last Updated on Saturday, 12 March 2016 10:36

You are here:   MainHow ToHow To Root Samsung SM-G388F Galaxy Xcover 3 - v4.4.4 KitKat
| + -
We have 141 guests online