Banner

Samsung CSC Code Finder

Download It for FREE

How To Update Samsung I927 Captivate Glide Firmware, Easy And Safe Guide

Friday, 11 January 2013 10:14 TSAR3000

How To Update Samsung I927 Captivate Glide Firmware, Easy And Safe Guide


You may ask yourself, Why I would read this guide?

The answer is easy, Because it is the best way to update the firmware of your Samsung Captivate Glide, Whenever you want, Even if you can not do it via kies for any possible reason.

This Guide will take you through the needed steps one after another, Starting by downloading the tools and files, Then going to be selecting and operating the complete process by yourself.

The First thing to do is to make a backup of any wanted data on your phone, As the update process will delete them.


Now download and get the following tools and files:

- Stock Firmware of Samsung I927 Captivate Glide: After downloading the wanted version extract it to use it later.

- Odin Flasher: you will use this program to install the firmware files into your device.

- Samsung I927 USB Drivers: download the drivers, Then install them on your PC, And restart it.

- Original USB cable: The one that come with your Captivate Glide model.

Notice: Make sure that your phone's battery is fully charged, Or at least it has 90% of charging level.


Firmware Update Steps:

- Make sure that your phone is OFF, Then take its battery out.

- Run Odin flasher, The program you downloaded in first section of this guide.

- By default the Re.Partition option at Odin program's window is unchecked, If it is checked then uncheck it.

- The Auto Reboot, F.Reset Time options must be checked.

- In this guide we will use this firmware version as example (I927UCLJ3 Android 4.0.4).

- When you extract the firmware package you will find the following file inside:

I927UCLJ3_I927UCALJ3_I927UCALJ3_HOME.tar.md5

- Click on PDA button on Odin's window and select the above file.

- Put the battery back into your phone but do not turn it on, Instead put it into Download Mode:

Hold Volume Up key then press Power key until you see the warning message on your phone screen, Now press the Volume Up key again to enter the Download Mode.

- Use the USB cable to connect the phone to our PC.

- Wait until your PC detects the phone and install its drivers.

- Look at Odin's window to check if your phone has been detected, You should see the com number of your phone 0:[COMxx], That means everything is going well.

- Now you are ready to begin the update process, Just click on START button.

- You have to wait for a few minutes until Odin does his job and reboots your phone.

- At this step you can disconnect the phone, Never try to disconnect it before that.

- When Odin successfully installs the firmware you will see PASS! Word on its window.

- After your Captivate Glide is fully on, Do full reset by this code: *#2767*3855#

- Do not worry because your phone will be rebooted after entering the code, Just wait.

- Now your phone is updated, Go and enjoy your job.


Things You Should Know:
- Flashing your phone can not remove SIM locks, If you want to unlock your Captivate Glide I927 you can use our online unlock server.

- The PC you use to update your phone must be stable, To keep you away from troubles.


Last Updated on Friday, 11 January 2013 10:25



You are here:   MainHow ToHow To Update Samsung I927 Captivate Glide Firmware, Easy And Safe Guide
| + -
We have 261 guests online