Samsung CSC Code Finder

Download It for FREE

How To Update The Firmware Version Of Samsung S6810 Galaxy Fame, And S6810P Galaxy Fame NFC

Monday, 18 March 2013 15:36 TSAR3000

How To Update The Firmware Version Of Samsung S6810 Galaxy Fame, And S6810P Galaxy Fame NFC

This Guide can be used to update Samsung Galaxy Fame, S6810 and S6810P with NFC, There is one thing you should be careful about, And it is the firmware files for each one should not be used to flash or update the other one, In simple words use S6810 firmware files to update S6810 model only.

Making a backup of your saved data on your Galaxy Fame mobile phone is a great and important step to start with, So you should check if you want to keep any of those data before moving to other update steps.

To perform the update you need to get some files and tools too, But do not worry about that, All are provided in this guide.

Files and Programs:

- Original Firmware Package for Samsung S6810 / S6810P.
- Odin Flasher.
- USB Drivers for Samsung Galaxy Fame.


- Original USB cable for Samsung Galaxy Fame, Or any suitable one.
- A computer running Windows OS.

Samsung Galaxy Fame Firmware Update Steps:

- After downloading the needed files and programs, Extract any zipped one, And install the USB drivers, Then it is better to restart your computer.

- Check your phone's battery (Must be at least at 90%).

- Turn Off the phone.

- Take out the phone's battery, SIM card, And memory card too.

- Run Odin.exe flasher program.

- Auto Reboot, F.Reset Time options must be checked.

- In case you need to flash *.PIT file too, Then check Re-Partition option.

- Click on PIT button and select: nevisp.pit file (only when Re-Partition is checked).

- Now you are going to select the firmware files from its extracted folder:

Click Bootloader button to select: BOOT_S6810xxxxxx_REV00.tar.md5

Click PDA button to select: CODE_S6810xxxxxx_xxxx_REV00_...tar.md5

Click PHONE button to select: MODEM_S6810xxxxxx_REV00.tar.md5

Click CSC button to select: CSC_Oxx_S6810xxxxxx_xxxx_REV00_...tar.md5

- Put the phone's battery back, But do not turn it on.

- To put the Galaxy Fame into Download Mode you have to:

Press and Hold Volume Down key + Home key, Then press Power key.

- Connect it to the computer via the USB cable, And wait for it to be detected.

- Odin will detect the Com number of your phone, It will look like this 0:[COMxx].

- Click on Start button.

- Odin program will start installing the selected firmware files into your Galaxy Fame.

- You have to wait for some minutes, But don't interrupt the process at all.

- Your phone will be rebooted after the process is done.

- If it was a successful update, You will see PASS! word at Odine's window.

- Disconnect the USB cable from phone.

- When your phone is fully on, You can do a full reset by this code *2767*3855#

- When you have one file inside the firmware update package, Then don't check Re-Partition option, And don't select any PIT file. The one file must be selected as PDA file.

Available Services:
- Online Unlocking for Samsung S6810 / S6810P Galaxy Fame.

Last Updated on Monday, 18 March 2013 20:26

You are here:   MainHow ToHow To Update The Firmware Version Of Samsung S6810 Galaxy Fame, And S6810P Galaxy Fame NFC
| + -
We have 124 guests online