Banner

Samsung CSC Code Finder

Download It for FREE

How To Update Samsung Galaxy Tab 2 10.1 SGH-T779 Firmware Version Using Odin Program

Friday, 29 March 2013 14:17 TSAR3000

How To Update Samsung Galaxy Tab 2 10.1 SGH-T779 Firmware Version Using Odin Program


In this Guide we will try to teach you how you can update the firmware version of your Samsung T779, This model is called the Galaxy Tab 2 10.1 for T-Mobile USA. We will give you also all you need to perform the operation, So that will save your time too. Please take some time first to read the complete Guide as that will keep your device away from any possible errors.


Useful Tips:

- Start with making a backup of all your important data like SMS, Contacts...etc.
- Charge your phone's battery to be fully charged.
- Check the computer that will be used for the update process, And make sure it is stable with no sudden freezing or restarting.


Files and Programs:

- Download a Stock Firmware Package for Samsung T779.
- Download The USB Drivers of Samsung T779.
- Download Odin Flasher.

Tools:

- Original USB Cable of Samsung T779, Or any suitable one.
- A Computer running Windows OS.

Download all the needed files and programs, Then extract any zipped ones, And install the USB drivers on your computer and restart it after that.


Samsung T779 Galaxy Tab 2 10.1 Firmware Update Steps:

- Turn your phone off.

- Take out its battery, SIM card, And microSD card too.

- Run Odin.exe program.

- You need to check only these two options: Auto Reboot + F.Reset Time

- Never check Re.Partition option, Unless you have Full firmware package and PIT file.

- Click on PDA button to select the single firmware update file which is located into the extracted firmware folder.

- Put the phone's battery back, But don't turn it on.

- You need to put the phone into Download Mode before connect it to PC:

Press and Hold Volume Down key then press Power key for 10 seconds, After you get the yellow triangle on screen release both keys and press Volume Up key.

- Now connect the phone to the computer using the USB cable.

- Wait until Windows detects the new device correctly and installs the drivers for it.

- When Odin detects your connected phone, You will see the COM number of it at Odin's window 0:[COMxx]

- To start the update process click on Start button at Odin's window.

- Installing the new firmware files on your Galaxy Tab 2 10.1 will take few minutes only, So wait for it to be done.

- After Odin does his job, Your phone will be rebooted.

- Unplug the USB cable from your phone.

- Look at Odin's window, If you see PASS! Word then the update was done successfully.

- When your phone is fully on, It is better to do full reset by using this code *2767*3855#

- After the phone restarts you are free to customize it as you like and start enjoying the new firmware version.


Last Updated on Friday, 29 March 2013 14:34



You are here:   MainHow ToHow To Update Samsung Galaxy Tab 2 10.1 SGH-T779 Firmware Version Using Odin Program
| + -
We have 224 guests online