Banner

Samsung CSC Code Finder

Download It for FREE

How To Update Samsung GT-E2252 Metro Firmware Using The USB Cable

Tuesday, 07 May 2013 09:45 TSAR3000

How To Update Samsung GT-E2252 Metro Firmware Using The USB Cable


The Samsung E2252 Metro is known also as Samsung E2252 Utica, So the both names are for the same model, And in this guide we will use the USB cable and free Flash Loader program to flash and update the firmware version of it.

Make sure to get the needed files and tools before starting the process as that will save your time, Also remove the SIM-card and memory card from the phone before updating it.

Tools and Files:

- Samsung GT-E2252 Firmware Package.
- GT-E2252 Flash Loader program.
- USB cable.
- A computer with Windows OS installed.

Download and collect the above tools and files first, Then extract any zipped one to save time during the update process, After that you can start applying the below steps one by one.


Samsung GT-E2252 Firmware Update Steps:

- Look inside the Flash Loader folder, You will see: Sunstone_V5_00_0_1_WHQLed.zip extract it too.

- Run bfloader.exe program.

- Click on SET Model button to select: E2252_Utica_Setting_v00_production.mdl

- Click Main Partition button.

- At the opened window click on Browse button to select E2252XX.ptt file from the extracted firmware BIN folder, Then click OK.

- Click CSC button.

- At the opened window click on Browse button to select E2252XX.ptt file from the extracted firmware CSC folder, Then click OK.

- Click on START button.

- With battery inside the turned off phone Press and Hold 1 + 3 Keys then plug the USB cable to it.

- When Windows Asks you for Drivers browse to Sunstone_V5_00_0_1_WHQLed folder.

- When Flash Loader program detects your phone it will start to install the firmware files into your device.

- After Flash Loader finishes his job you will see "Slot freed for new download"

- Disconnect the USB cable from it.

- Turn on your Samsung E2252.

- Do full reset using this code *2767*3855#

- After rebooting your phone will be ready to use.


Notice: In case the Flash Loader program doesn't detect the phone at the first time, Try to disconnect it and try again, Also you can try to press and hold 1 key and connect USB cable to it, Or press and hold 2 key and connect USB cable to it.


Last Updated on Tuesday, 07 May 2013 11:04



You are here:   MainHow ToHow To Update Samsung GT-E2252 Metro Firmware Using The USB Cable
| + -
We have 318 guests online