Banner

Samsung CSC Code Finder

Download It for FREE

How To Update Samsung SGH-M919 Galaxy S4 T-Mobile Firmware Version - Manual Update Guide

Thursday, 09 May 2013 08:51 TSAR3000

After The Samsung Galaxy S4 came to markets and the US market is one of them, You may need to update the firmware version of M919 GS4 from T-Mobile to a newer one or even to fix some errors that could happen during the normal use of it, So this Guide will help you in your mission.


Important Notices:

- Make a backup of your phone's data before making any update, Otherwise you will not be able to recover anything from it after updating its firmware.
- Charge the phone's battery to be at least at 90%.
- Use stable computer to perform the update process.
- Use only the original USB cable of your Samsung M919 GS4 mobile phone.


Downloads:

- Samsung M919 GS4 Stock Firmware Package: Extract the package after downloading.
- Odin Flasher: Extract it for using it later
- USB Drivers of Samsung M919 GS4: Install the drivers and restart your computer after that.

Tools:
- Original USB cable of Samsung M919 GS4.
- A computer running Windows OS.


Samsung M919 GS4 Firmware Update Steps:

- Turn off your Samsung M919 GS4.

- Take out the SIM-card, And memory card in case it has one inside.

- Run Odin.exe program.

- Check the following options: Auto Reboot, F.Reset Time

- Click on PDA button at Odin's window.

- From the extracted firmware package select this file:

M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5

- To put your M919 GS4 into Download Mode press and hold Volume Down key + Home key, Then press Power button until you see the warning message on its screen, Then release all keys and press Volume Up key to be into Download Mode.

- Use the original USB cable to connect your Samsung M919 GS4 to the computer.

- Wait until Windows detects the phone and installs the needed drivers for it.

- When Odin program detects your phone you can see the COM port number of it 0:[COMxx]

- Now you are ready for the update, Just click on Start button.

- Odin program will do the job for you, So give it some minutes.

- Your Samsung M919 GS4 will be rebooted after installing the new firmware files into it.

- In case the update was done successfully then you will see PASS! Word at Odin's window.

- After the Samsung M919 GS4 is fully on enter this code *2767*3855#

- The phone will restart one more time.

- Now when your Samsung M919 GS4 is on again you can use it and select the wanted settings.


Last Updated on Thursday, 09 May 2013 08:59



You are here:   MainHow ToHow To Update Samsung SGH-M919 Galaxy S4 T-Mobile Firmware Version - Manual Update Guide
| + -
We have 260 guests online