Banner

Samsung CSC Code Finder

Download It for FREE

How To Update The Firmware Of Samsung T210 Galaxy Tab 3 7.0 - Stock Firmware

Monday, 10 June 2013 17:55 TSAR3000

This is another Guide of our guides collection to help our visitors to Update the firmware version of their devices, And this one will show you the right way to update the firmware version of the latest Samsung Model the Galaxy Tab 3 7.0 T210, We use only simple and clear steps to let you do it yourself.

The best step to start with is making a backup of your phone's data, To do this backup yourself you can read our guide here, After that you can move to the next steps.


Downloads:

- Samsung T210 Galaxy Tab 3 7.0 Stock Firmware package.
- Odin flasher.
- USB drivers for Samsung Galaxy Tab 3 7.0 T210.

After downloading the above files you should extract any zipped ones, And install the USB drivers then restart your computer, That will help you to get rid of any possible errors during the update process.

Tools:

- A computer running Windows OS.
- Suitable USB cable for Galaxy Tab 3 7.0


Samsung T210 Galaxy Tab 3 7.0 Firmware Update Steps:

- Check that your device battery has at least 90% of charging level.

- Turn off your device.

- Run Odin.exe program.

- Check these options: Auto Reboot, F.Reset Time

- In case you have full firmware package with PIT file included then check Re.Partition option too.

- Click on PIT button and select *.pit file

- Now you should select the firmware files in the following order:

Bootloader: BOOTLOADER_T210xxxxxx_....tar.md5
PDA: CODE_T210xxxxxx_....tar.md5
CSC: CSC_Oxx_T210Oxxxxxxx_....tar.md5

- To put your Galaxy Tab 3 7.0 into Download Mode follow these steps:

Press and Hold Volume Down key + Power key for 5 seconds, And when you see the warning message release them both.

- Press Volume Up key to enter the download mode.

- Connect the device to your computer using the USB cable.

- Wait until Windows detects the phone and installs its USB drivers.

- When your device is correctly detected then you will see its COM port number at Odin's window 0:[COMxx]

- At this step you are ready to begin the update, Just click on Start button.

- Odin will do the work for you, So wait for it.

- After finishing the update process the device will be rebooted.

- Disconnect the USB cable from your device.

- Look at Odin's window and you should see PASS! Word in Green background, That means that everything is ok.

- When you Galaxy Tab 3 7.0 is fully on it is better to do full reset using the code *2767*3855#

- The device will reboots one more time, Just wait for it.

- Now when the Galaxy Tab 3 7.0 is on again you can start using it as you like.


Last Updated on Monday, 10 June 2013 18:12



You are here:   MainHow ToHow To Update The Firmware Of Samsung T210 Galaxy Tab 3 7.0 - Stock Firmware
| + -
We have 199 guests online